When it comes to protecting your home or business from fire, different environments have different fire hazards associated with them, which will present different fire protection challenges.
All businesses should be aware of the level of risk that fire poses to them, so that they can adequately protect themselves against the threat of fire. Risk assessments play a crucial part in determining how at risk a particular environment is from fire.
But what are the environments or places that are most of risk of fire?
According to an IFSEC study, the following environments were found to have the biggest potential risk of a fire breaking out. We take a look at these areas and how to mitigate the fire risk.
Restaurants and Takeaways
Restaurants and takeaways came top on the list, which is not at all surprising when you think about the number of potential fire risks associated with them. Kitchen environments typically have an abundance of ignition materials, combined with naked flames and ovens. The fast paced nature of many restaurant kitchens also makes accidents more likely to occur due to basic human error.
Obviously restaurants in particular need to find ways of reducing the fire threat, as a busy restaurant filled with guests has the potential for a disaster waiting to happen. The fire risk in restaurant kitchens can be reduced by diligently following fire safety procedures and ensuring staff are trained in fire prevention. Basic measures, such as ensuring cooking oil is stored away from sources of heat and ignition also need to be put in place for safety.
If a fire does break out, having the appropriate fire extinguisher on site to put out a Class F fire is vital to tackle the fire early on before it gets out of control. All commercial kitchens should have wet chemical fire extinguishers installed, as these are specially designed to extinguish cooking oil and kitchen related fires.
Houses/Flats with Multiple Occupants and Rental Properties
Houses with multiple occupants such as rental properties, flats and complexes are another environment with a high fire threat. With more people living in a space, the potential fire risk increases. Each person may have their own electrical equipment and shared equipment may be less likely to be checked, as no single occupant is responsible for replacing damaged appliances and faulty wiring etc.
In terms of layout, multiple occupant properties are often more complex, making escape more difficult. For example there may be a single stairwell, which is the main evacuation route for all occupants. In the event of a fire, panic may ensue, so evacuation procedures need to be carefully managed to ensure everyone knows how to get out of the building safely and without worry.
It’s crucial for landlords/owners to provide guidance on fire safety in the property and ensure fire escapes are clearly marked with appropriate signage. Fire alarms should also be installed in each separate dwelling, communal areas and on every level to alert occupants to danger, giving them maximum time possible for escape.
Bars and Nightclubs
Another unsurprising inclusion on the list is bars and nightclubs. These places can often host a large volume of people in a relatively small space, which presents a big danger if a fire were to break out. Bars are particularly at risk from fire because alcohol is a highly flammable substance and having a large quantity of this stored on the premises obviously increases the fire threat.
Smoking is also another common cause of fire and although in the UK it is illegal to smoke inside bars, cigarettes can still potentially start fires if not disposed of properly and if not the no smoking policy is not strictly enforced so people only smoke in designated areas.
Emergency evacuation plans are crucial for bars and nightclubs. Bar staff should be well trained in fire safety procedures and what to do if a fire breaks out. Sadly there have been several high profile cases where fires in bars and nightclubs have resulted in loss of life, such as the 2013 fire in a Brazilian nightclub, in which 240 died as there were insufficient fire safety measures put in the place.
Why fire risk assessments are important
The best way to find out how you can protect your home or business from fire is to seek professional advice. Most fire protection companies will offer to do a risk assessment of your premises to identify fire hazards and recommend measures to reduce the fire threat. Regardless of the fire protection challenges your environment presents, safety must always be your top priority.
More information on reducing fire threat
Get a complete fire risk assessment of your premises today from Euro Fire Protection. We also provide a wide range of fire detection and protection equipment. Call us today on 08000 515 199.Tags: fire protection, fire risk assessments, fire safety, reduce fire risk, top fire threats
Every year fires break out in workplaces across the country resulting in serious damage to property and even injury and death. In the UK each year there are around 25,000 non-residential fires reported, with a significant proportion of these fires occurring in the workplace.
There are a variety of reasons why these fires break out, although many are due to negligence and could be prevented with more care and attention. One of the best ways to protect your business against fire is to educate your staff on the causes of fire and encourage them to be vigilant and report any potential fire hazards, so that they can be dealt with swiftly.
Although each working environment is different, here are some common workplace fire hazards that you should look out for and how to reduce the risk of them causing a fire.
Waste and combustible material being stored on site
In many workplaces, in particular offices, there can be a build-up of waste such as paper, cardboard and other combustible materials. If this is not disposed of regularly, it provides plenty of fuel for any potential fires should they break out. All it takes is a source of ignition, for example a discarded cigarette to set this alight and it could result in a fire that burns rapidly.
For this reason you should avoid storing rubbish on site is possible, or if you must – make sure it is in a designated area, away from main buildings and any potential sources of ignition.
Flammable liquids and vapours
This may be more of a threat in some types of workplace than others. Those particularly at risk include industrial warehouses and factories where there may be large amounts of flammable liquids and vapours stored. This can also cover anywhere that these materials are present such as garages, hotels and kitchens. Flammable liquids can ignite instantly when they come into contact with a spark or naked flame. Vapours are also particularly dangerous as they spread out, carrying the risk of an explosion with devastating consequences.
To reduce the risk of a fire, always ensure that flammable liquid and solvent containers are sealed properly and if any spills do happen, they are cleaned up immediately.
Dust and powder from wood, plastic and metal operations can cause explosions in enclosed spaces if there is no proper ventilation. Extraction fans should be installed in places where there is a risk of dust in the air, for example in environments such as mines and factories. Equipment and machinery that heats up when used should also be kept clean and free of grease and dust so that this does not burn, starting a fire.
Objects that generate heat
Heat is one of the vital ingredients of fire. Some electrical equipment and machinery warms up when used providing the potential for a fire to start. Make sure you keep combustible materials such as paper away from heat sources and remember to unplug any equipment that is not being used if possible. Never leave any electrical equipment or machinery on overnight unless it is necessary.
Faulty electrical equipment
Fires caused by electrical equipment are one of the most common types of fire in the workplace. Look out for any signs of loose cabling, damaged plugs and replace any faulty equipment. All electrical equipment should be regularly checked and PAT tested by an expert.
Overloading power sockets
This is a fairly common cause of electrical fires but it is one that is easily avoided. If too many appliances are plugged into the same socket or if faulty extension cords are used, this can result in overheating and potentially a fire. Always make sure that you use one plug in each socket and don’t use appliances that total more than 13amps or 3000 watts across the whole socket.
Discarded cigarettes can cause fires if not put out and disposed of properly. Smoking can be especially hazardous if it is allowed to take place near areas where flammable materials are present. Therefore a designated smoking area should be allocated in your workplace away from main buildings and flammables. Staff should also be encouraged to make sure that any cigarettes are put out properly and to use specially provided bins for their cigarettes.
Human error and negligence
It has to be said that one of the most common causes of fires in the workplace is human error. Fires can occur as a result of negligence in a variety of different ways including improper use of equipment, accidents, drinks being spilt over electrical equipment and leaving cooking unattended.
Although you cannot completely remove the human error factor, through proper training you can take steps to reduce it by providing effective training and guidance for your staff advising on best fire safety practice.
If the worst does happen and a fire starts, having fire fighting equipment on site such as fire extinguishers, blankets and hose reels are vital for bringing fires under control. However you should use caution and make sure that all staff are trained to use the correct type of fire extinguisher as incorrect usage can be dangerous.Tags: fire extinguisher types, fire hazards, fire protection equipment, fire protection in the workplace, fire risk assessments, fire safety training, protect business against fire, using fire extinguishers, what fire extinguisher should I use?, workplace fire practice
Choosing which fire protection company to supply your business is an important decision, there are many choices available to you and you should look beyond cost when deciding. Fire safety equipment is designed to protect businesses from the threat of fire and save lives. Therefore it’s essential that you take time and do some proper research to weigh up the options available to you.
Firstly your fire equipment must comply with safety standards, so check with the supplier that shows awareness of the latest fire safety standards and can guarantee that their equipment is in line with these requirements.
Look out to see if the supplier is a member of any relevant fire safety bodies or if they’ve received any accreditations from within the industry. This should show a level of expertise and demonstrate that the company is recognised by the industry. A few of these that are a good indication include BAFE approval, CHAS & SafeContracor accreditations, membership of the British Fire Consortium and the Fire Protection Association.
Don’t be afraid to ask questions, this is the best way to delve deeper and find out if the supplier can provide not just equipment, but also the service that you are looking for. Enquire about their product’s safety records and ask to be supplied with testimonials from previous clients. It will be very telling if the company refuse to allow you to do this!
To take your investigation further, you could then contact these past customers and ask if they would recommend the company’s services. If you don’t fancy doing that, you could always try a good old fashioned Google search looking for reviews on the company or complaints. Type in the company’s name followed by ‘complaints’ and feast your eyes on the results.
Another important check is to find out how long the supplier has been in business. If the company is fairly new, you may not know how stable they are and how long they will be around. Ideally you want a long term supplier, not one that could go under and leave you with equipment that cannot be replaced. For a similar reason make sure that the supplier isn’t tied to a single manufacturer because if the manufacturer ceases to be then your fire protection supplier will in turn have issues supplying your business.
Ideally you want a team of specialists that can cater for all of your fire protection needs. That will cover not just equipment but also additional services such as fire risk assessments. It helps to have the same company carrying out a risk assessment as providing fire safety equipment, as then they have a better idea of your premises fire safety needs and can tailor the products they provide to this.
As an added bonus, look out for companies that provide a free site survey. These are extremely helpful in evaluating which fire protection equipment is most appropriate for your business.
The level of customer service that you receive is also an important consideration, so monitor all of your dealings with the company, looking especially at the time it took them to respond and how helpful they were. Did they go out of their way to help you? These considerations should all play a part when you’re weighing up your options.
Think about the type of service that you require, will you need maintenance 24/7 and replacements in the event of equipment failure? Choosing a supplier that is local is a good idea, especially if you may need emergency equipment maintenance.
Finally when you’ve chosen a few companies that you are interested in, it’s then time to bring cost into the equation. Get an estimate from each of the companies and make an informed decision based on the benefits that each provides against the cost. Of course, don’t be tempted to go for the cheapest option. Especially when safety is concerned, paying that bit extra can be worthwhile if you will be getting a better service.
Choosing the right supplier for fire protection equipment is a vital part of your business’s fire safety strategy and should not be taken lightly. If you follow the steps that we have mentioned in this article then you should be able to find a supplier that suits your requirements and provides you with peace of mind that you will get the service that you need.Tags: fire detection systems, fire protection in the workplace, fire risk assessments, fire safety, workplace fire practice
Although no one wants to imagine a fire occurring in their workplace, fire prevention and protection is essential for your business. Your business must put in place procedures to reduce the risk of a fire and protect employees in the unfortunate event that a fire breaks out.
Every working environment will have different risks associated with it. By law your business must have a fire risk assessment carried out, to identify fire risks and hazards in your premises. A site survey will help to advise you on the best fire protection equipment and what your business needs to do to protect itself against the threat of fire.
Identify Fire Hazards in Your Workplace
The first stage in fire prevention is to establish any sources of ignition that could potentially spark a fire. For a fire to start it needs three things – fuel to burn, oxygen to feed the flames and a source of ignition to set it off. To reduce the chances of a fire starting you must take steps to ensure that these 3 ingredients are kept apart.
Ignition sources can include naked flames, sparks from burning materials, faulty electrical equipment, cooking, heaters and lit cigarettes. When you have identified these potential risks you need to find ways of mitigating them and educating staff so that these are handled properly to maintain the highest level of safety.
Identify the People that are at Risk
As an employer your most important duty is to protect your workers and in some cases any members of the public who may enter your premises. You must identify in particular the groups that may be most at risk including those that are working near fire dangers, people working alone, children, elderly and the disabled.
Evaluate the Level of Risk and Take Steps to Reduce It
Once you have established any potential fire threats in your workplace and which people are most vulnerable, you need to determine how much of a fire risk each individual threat is. You can then look into ways that you can tackle them to make your workplace a safer place.
This could be something as simple as making sure flammables are kept away from sources of ignition or replacing highly flammable materials wherever possible with less flammable materials. You should also make sure that electrical equipment is PAT tested and checked for faults regularly and that if smoking is allowed on your premises, it is only allowed in a designated, safe area away from main buildings and flammable materials.
Get the Experts in for a full Fire Risk Assessment
When dealing with fire safety, it’s always best to leave nothing to chance. We would strongly recommend getting a qualified and experienced professional to carry out a fire risk assessment for you. Since 2005 fire risk assessments have been a legal requirement under the Fire Safety Order and should cover everything from high fire risks & hazardous activities, methods of detecting fires, maintaining escape routes, fire fighting equipment and training. Your business must act on the findings of the assessment to take appropriate measures to minimise the risk of injury or loss of life if a fire does occur.Tags: fire hazards, fire protection in the workplace, fire risk assessments, fire safety, preventing fires